Warehouse operators choosing equipment for inventory counts, racking inspections or lighting work should assess the whole operating environment rather than focus solely on working height. Aisle width, floor loading, platform capacity, battery endurance and operator training can determine whether a machine is viable.
Coman Lifting identifies three common indoor options: electric scissor lifts, vertical mast lifts and order pickers. A pre-selection survey should record the highest task, narrowest aisle, door and mezzanine restrictions, floor type, permitted loading, carried materials and required time between charges.

Scissor lifts provide a relatively spacious deck for predominantly vertical work, which can benefit two-person stock counts or inspections involving several tools. Their wheel loads still need checking on suspended floors, and non-marking tyres are appropriate for finished surfaces. Battery performance should be assessed against the actual duty cycle.
Mast lifts are generally narrower and lighter. Where fitted with a short jib, they can reach over racking or conveyors while keeping the base in the aisle. Operators must verify real outreach and clearance, while accounting for the typically lower platform capacity.
Order pickers are designed for work along the racking face. They can be efficient for trained operators carrying out cycle counts at picking levels, but are less suitable for side reach, two-person work, large platforms or bulky components outside the picking face.
Each model requires specific familiarisation, including emergency lowering, and a pre-use inspection should be completed every shift. Planning must cover overhead structures, sprinklers, cable trays and the exclusion zone below a raised platform. Guarding and sensing technologies can help address crush risks, but do not replace procedures.
Providing suppliers with measurements and aisle photographs can prevent unsuitable equipment from arriving on site. Clear vertical tasks generally favour scissors, restricted access with outreach points to a mast lift, and face-level counting may already be covered by an order picker.






